AMP860
Home Amplifier 860MHz, indoor, plastic case, F connectors, TAP-12dB, 1 Out 20dB
| Installation and operating • Before use the amplifier, test input level whether at the range of input level. You should adjust input level into it. • Output level can’t be too high. Just keep every TV set level at 60~75 dBµV. Turning ATT knob to adjust output level. • When in thunder, to avoid lightning strike, you’d better turn off power supply. The amplifier used indoor only and avoid be affected with damp or high temperature. • Keep power supply voltage at common range. Too low voltage will cause figure quality bad. | |
| Specifications: | |
|---|---|
| Frequency Range | 45-862MHz |
| Swing frequency characteristics | ±1.5dB |
| Gain | 20dB |
| Gain adjustable range | 0~10dB |
| Input level range | 67 dBµV~ 78dBµV |
| Max output level | 108dBµV |
| Tap | -12dB |
| Impedance | 75Ω |
| Power voltage | 220V±15% (50Hz) |
Product structure:
1. Power supply
2. Main signal output
3. Tap signal output
4. Power indicator
5. Adjustable attenuator
6. RF signal input